| Trailers
Most Advanced Available
Trailer enclosures are made of welded 11 gauge steel, and the chassis frame is welded structural steel C-channel. Engine vibration is dampened with shock absorbing rubber mounts. Electric activated brakes are standard. The units are equipped with two ASME air storage cylinders for ample air storage capacity. A containment fill station for two SCBA cylinders with fill whips and adapters, and storage cabinet for up to ten SCBA cylinders are also standard.
|
| |
| Instrumentation |
- Emergency stop button
- Pressure gauges - all stages
- Oil pressure gauge
- Hour meter
- Diagnostic indicator lights
Low oil pressure
High air temperature
- Keyed start/power switch
|
| Features |
- 12-volt electric starting system
- Dual axle trailer, rated for 7000 lbs. gross vehicle weight
- Stainless steel control and operations panel located curbside and lighted for night operation
- 10 SCBA storage
- Enclosed underside
- Electric brakes
- 2 ASME storage cylinders, capacity for 4
- 11 gauge sheet metal enclosure
- Spare tire and rim
- Automatic condensate drain
- Automatic condensate drain muffler/reservoir
- 20 gallon fuel tank
|
|
|
|
|
| Compressor |
- 4-stage air-cooled compressor
- 5000 or 6000 psi working pressure
|
| Air Purification |
- Air purification is standard
|
| Optional Equipment |
- Dual electric and engine drive using reliable air clutch design (dimensions may vary)
- Excessive tilt shutdown monitor
- Two additional air storage cylinders
- Four-bank cascade control
- CO monitor
- Purification cartridge monitor
- Air reel, manual or electric rewind
- Plug-in outlet for external battery charger
- Three position containment fill station
- Generator and extendable pole-mounted flood lights
- SCBA or SCUBA capability
|
| |
|
| |
|
